| GoPro Helmet Mount for Shoei Hornet X2
Mounts a GoPro to your Shoei Hornet X2. Slips in under the chin bar and aligns with the chin-vent. Incredibly sleek and lightweight. The mount itself provides nearly zero wind resistance. Attaches with the included adhesive.
Includes a stainless steel thumbscrew and nut for attaching your GoPro. Mount is made of durable PETG. Lifetime warranty.
Chin-mounting provides the best angle for capturing good stable riding footage. Check out the test video or check out the build video HERE.
| $34.99
IN STOCK
If ordered today, will ship out:
in 3-5 days
|
| Toyota FJ40 Land Cruiser Cup Holder
Designed for Toyota FJ40's manufactured between September 1972 and December of 1978 (1973 to 1978 model year). 3-d printed in durable black PETG plastic. Blends very nicely with the stock FJ interior. Holds 2 cups and offers a pocket for your cellphone.
I designed and featured this on my 'Functional Print Friday' YouTube channel on 4/8/2022.
| $68.00
IN STOCK
If ordered today, will ship out:
in 3-5 days
|
| Routing Sleeve for Land Pride 3rd Function Kit on L-Series Kubota Tractors
Cleans up the appearance and makes the wire routing much more secure and weatherproof for a Land Pride 3rd Function Kit mounted on a Kubota L-Series tractor with LA525 loader with straight-shaft control lever.
I originally designed this to fit on my L2501, but it should fit anything in the L series from Kubota with a straight loader control shaft, and likely fits other machines as well, but I've not been able to test it on other models. 3D Printed from high quality plastic with high-strength. Includes premium quality thick heat-shrink tubing (extra included). DOES NOT include the 3rd function kit. This is an ADD-ON for the 3rd function kit sold my Land Pride.
I featured this on my 'Functional Print Friday' YouTube channel on 10/21/2022, and the linked video shows it installed and how it works.
| $38.00
IN STOCK
If ordered today, will ship out:
in 3-5 days
|
| Land Pride SB1064 Electric Chute Rotation Gears (2)
You get (2) PLA drive gears. Buy this if you need spares or are making your own plate and supplying your own hardware, motor, wiring, etc..
This page has a video that shows hows this works and includes links to parts if you want to buy the (non-3d printed) parts on your own.
If you are looking for a turn-key kit that includes all parts and everything pre-wired, keep scrolling, it's available further down.
| $85.00
IN STOCK
If ordered today, will ship out:
in 3-5 days
|
| Land Pride SB1064 Electric Chute Rotation DIY Kit #1
You get the PLA drive gear, the PLA mounting plate, and 1 spare PLA drive gear.
The mounting plate mounts with the hardware that is removed from the manual chute rotation parts. All other hardware (motor, bolts, washers, switch, switchbox, wire, connectors, etc.) needed is supplied by you. No switchbox is included. This kit assumes you will be using an existing switch or mounting a switch in your own box/location.
This page has a video that shows hows this works and includes links to parts if you want to buy the (non-3d printed) parts on your own.
If you are looking for a turn-key kit that includes all parts and everything pre-wired, keep scrolling, it's available further down.
| $125.00
IN STOCK
If ordered today, will ship out:
in 3-5 days
|
| Land Pride SB1064 Electric Chute Rotation DIY Kit #2
You get the PLA drive gear, the PLA mounting plate, the ROPS-mounted switch housing (for 2x3 steel tubing ROPS), and 1 spare PLA drive gear.
The mounting plate mounts with the hardware that is removed from the manual chute rotation parts. All other hardware (motor, bolts, washers, switch, wire, connectors, etc.) needed is supplied by you. This is the same as DIY Kit #1, but with the ROPS-mounted switch housing included.
This page has a video that shows hows this works and includes links to parts if you want to buy the (non-3d printed) parts on your own.
If you are looking for a turn-key kit that includes all parts and everything pre-wired, keep scrolling, it's available further down.
| $175.00
IN STOCK
If ordered today, will ship out:
in 3-5 days
|
| Land Pride SB1064 Electric Chute Rotation - Bolt On
Fully assembled, wired, and ready to bolt on.
You get the PLA drive gear, the PLA mounting plate, the ROPS-mounted switch housing (for 2x3 steel tubing ROPS), 1 spare PLA drive gear, drive motor, switch, all wiring, connectors, and hardware.
The mounting plate mounts with the hardware that is removed from the manual chute rotation parts.
This is the FULL turn-key kit with everything needed arriving in one box. More importantly, everything is pre-wired and assembled. Don't under-estimate the switch and connector wiring that is ALREADY done in this FULL kit. It's about 2.5 hours worth of work to properly terminate, solder, and heat-shrink the 6-terminal DC polarity reversing switch and deans connectors at the switchbox, ROPS, and motor. The ONLY thing you will need to do is terminate and make the 12v connection to your tractor's fuse block, or other 12v accessory circuit. 10' of wire is supplied on the 12v input side.
This page has a video that shows hows this works.
| $488.00
ON SALE! IN STOCK
If ordered today, will ship out:
in 3-5 days
|
| Honda CRF450L Stock Exhaust Wash Plug
Completely seals up the exhaust pipe opening on the stock exhaust of the Honda CRF450L for washing. Built in lip extends past the edge of the exhaust when inserted.
Are there cheaper universal wash plugs available elsewhere? Sure. Do they fit as well and protect your investment like this one? Nope. Bring out the pressure washer. Made of flexible and durable TPU. Lifetime warranty.
| $15.99
IN STOCK
If ordered today, will ship out:
in 3-5 days
|
| Garmin Montana GPS Mount for Honda CRF450L
Provides a sturdy 12 degree angled base as low to the bars as possible for the garmin montana rugged mount.
Includes the plastic mid-piece that goes between the garmin universal mount (not included, but available HERE) stainless machine screws and washers to attach the garmin universal mount, the two lower aluminum feet, and the fasteners to attach the feet to the mid-piece (assembled). The stock bar bolts are re-used, as the aluminum feet are thin enough to still get plenty of engagement on the threads.
No-questions-asked 3-yr replacement warranty on the plastic mid-piece.
Requires you run stock CRF450L handlebars with cross-bar for mounting.
Checkout the video HERE.
| $99.99
IN STOCK
If ordered today, will ship out:
in 3-5 days
|
| L00 Spindle Nose Protector for Lathe
Spindle nose protector for lathes with an L00 (L-00) spindle. Serves 3 purposes: Protects the nose taper, keeps the spindle locking nut in place while the lathe is turning, and ejects any inserts in the inner spindle taper.
Checkout the video HERE.
| $45.00
IN STOCK
If ordered today, will ship out:
in 3-5 days
|
| L00 Lathe Bearing Pre-load Setting Spool
Used in coordination with a scale to properly set the bearing pre-load for lathes with an L00 (L-00) spindle. Does not include the string/twine, but this is what I recommend: https://amzn.to/3Ujb4sM
Checkout the video HERE.
| $45.00
IN STOCK
If ordered today, will ship out:
in 3-5 days
|
| 2-pack FA-57137400 FAIP Pressure Washer Oil Fill Plug
The FA-57137400 is the oil drain and fill plug for the Faip MTPV series pressure washer pumps. The FA-57137400 Oil Fill / Drain plug is a gray TPU plug with 1/4 turn twist lock threads and will require the use of O-ring part # FA-15065600. You can re-use your original o-ring.
The FA-57137400 will replace both the 16736 Oil Drain Plug and the 16736C Clear Oil Sight Glass that were used on the Faip oil lubricated pressure washer pump. The original clear resin plugs are known for breaking down and crumbling apart.
You will receive TWO plugs.
Checkout the video HERE.
| $27.00
IN STOCK
If ordered today, will ship out:
in 3-5 days
|
| 2-pack SPI Digital Caliper Battery Cover
Fits the "13-612-7" SPI 12" Caliper, and the "15-719-8" SPI 6" Caliper. Likely fits others as well, just compare to the shape of the one on your SPI Caliper.
You will receive TWO black PLA battery covers.
Checkout the video HERE.
| $18.00
IN STOCK
If ordered today, will ship out:
in 3-5 days
|
| PM-728VT Quill DRO Bracket Reinforcement
Fits the Precision Matthews PM-728VT Milling Machine. Solves the problem where the quill DRO has a bunch of flex and doesn't return to zero, resulting in anywhere from 1-3 thou inaccuracy, even under small load changes.
You will receive a bracket reinforcement piece made from premium black PLA, a shim to correct the factory error in distance between the front of the bracket and DRO scale, and all the new length mounting hardware necessary to install both pieces (2 x M4x25mm screws, 2 x M4x16mm screws, 2 x M4 nuts)
OVER A 4X improvement from stock!
Checkout the video HERE.
| $28.00
IN STOCK
If ordered today, will ship out:
in 3-5 days
|
| 2016-2023 Toyota Tacoma NO DRILL Tekonsha Primus IQ Brake Controller Mount
Fits 2016-2023 Toyota Tacoma and provides a mounting point for the Primus IQ Brake Controller. May fit other brake controllers as well, but the mounting holes are positioned and sized specifically for the Primus IQ. This mounts to the steel factory OBD port bracket with no drilling or additional holes or parts required.
Checkout the video HERE for more info on installation and mounting.
| $49.99
IN STOCK
If ordered today, will ship out:
in 3-5 days
|